Termination w.r.t. Q of the following Term Rewriting System could be proven:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.


QTRS
  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.

Using Dependency Pairs [1,15] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
U121(mark(X)) → U121(X)
MARK(tt) → ACTIVE(tt)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(plus(N, s(M))) → U411(isNat(M), M, N)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
MARK(U21(X)) → U211(mark(X))
MARK(U42(X1, X2, X3)) → U421(mark(X1), X2, X3)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)
U111(X1, mark(X2)) → U111(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
ACTIVE(plus(N, s(M))) → ISNAT(M)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
U121(active(X)) → U121(X)
U311(X1, active(X2)) → U311(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
S(active(X)) → S(X)
ACTIVE(U11(tt, V2)) → U121(isNat(V2))
U311(mark(X1), X2) → U311(X1, X2)
MARK(U41(X1, X2, X3)) → MARK(X1)
U311(X1, mark(X2)) → U311(X1, X2)
MARK(U41(X1, X2, X3)) → U411(mark(X1), X2, X3)
U211(mark(X)) → U211(X)
ACTIVE(U42(tt, M, N)) → PLUS(N, M)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
U421(X1, mark(X2), X3) → U421(X1, X2, X3)
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U42(X1, X2, X3)) → MARK(X1)
U111(mark(X1), X2) → U111(X1, X2)
ACTIVE(U41(tt, M, N)) → U421(isNat(N), M, N)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
ACTIVE(U42(tt, M, N)) → S(plus(N, M))
MARK(U12(X)) → MARK(X)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(U41(tt, M, N)) → ISNAT(N)
MARK(s(X)) → MARK(X)
PLUS(active(X1), X2) → PLUS(X1, X2)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
ACTIVE(plus(N, 0)) → ISNAT(N)
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
PLUS(mark(X1), X2) → PLUS(X1, X2)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U11(X1, X2)) → U111(mark(X1), X2)
ACTIVE(isNat(0)) → MARK(tt)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
ACTIVE(plus(N, 0)) → U311(isNat(N), N)
MARK(U31(X1, X2)) → U311(mark(X1), X2)
MARK(s(X)) → ACTIVE(s(mark(X)))
U411(active(X1), X2, X3) → U411(X1, X2, X3)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
ACTIVE(U21(tt)) → MARK(tt)
PLUS(X1, active(X2)) → PLUS(X1, X2)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U111(active(X1), X2) → U111(X1, X2)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
S(mark(X)) → S(X)
MARK(s(X)) → S(mark(X))
MARK(U12(X)) → U121(mark(X))
U421(X1, X2, active(X3)) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)
ACTIVE(isNat(plus(V1, V2))) → ISNAT(V1)
U211(active(X)) → U211(X)
MARK(U21(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(plus(V1, V2))) → U111(isNat(V1), V2)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(U11(tt, V2)) → ISNAT(V2)
ACTIVE(isNat(s(V1))) → ISNAT(V1)
MARK(0) → ACTIVE(0)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(X1, mark(X2), X3) → U411(X1, X2, X3)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))
ACTIVE(U12(tt)) → MARK(tt)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS
  ↳ DependencyPairsProof
QDP
      ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
U121(mark(X)) → U121(X)
MARK(tt) → ACTIVE(tt)
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(plus(N, s(M))) → U411(isNat(M), M, N)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
MARK(U21(X)) → U211(mark(X))
MARK(U42(X1, X2, X3)) → U421(mark(X1), X2, X3)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)
U111(X1, mark(X2)) → U111(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
ACTIVE(plus(N, s(M))) → ISNAT(M)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
U121(active(X)) → U121(X)
U311(X1, active(X2)) → U311(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
S(active(X)) → S(X)
ACTIVE(U11(tt, V2)) → U121(isNat(V2))
U311(mark(X1), X2) → U311(X1, X2)
MARK(U41(X1, X2, X3)) → MARK(X1)
U311(X1, mark(X2)) → U311(X1, X2)
MARK(U41(X1, X2, X3)) → U411(mark(X1), X2, X3)
U211(mark(X)) → U211(X)
ACTIVE(U42(tt, M, N)) → PLUS(N, M)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
U421(X1, mark(X2), X3) → U421(X1, X2, X3)
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U42(X1, X2, X3)) → MARK(X1)
U111(mark(X1), X2) → U111(X1, X2)
ACTIVE(U41(tt, M, N)) → U421(isNat(N), M, N)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
ACTIVE(U42(tt, M, N)) → S(plus(N, M))
MARK(U12(X)) → MARK(X)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
ACTIVE(U41(tt, M, N)) → ISNAT(N)
MARK(s(X)) → MARK(X)
PLUS(active(X1), X2) → PLUS(X1, X2)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
ACTIVE(plus(N, 0)) → ISNAT(N)
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
PLUS(mark(X1), X2) → PLUS(X1, X2)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(U11(X1, X2)) → U111(mark(X1), X2)
ACTIVE(isNat(0)) → MARK(tt)
U411(X1, X2, active(X3)) → U411(X1, X2, X3)
ACTIVE(isNat(s(V1))) → U211(isNat(V1))
ACTIVE(plus(N, 0)) → U311(isNat(N), N)
MARK(U31(X1, X2)) → U311(mark(X1), X2)
MARK(s(X)) → ACTIVE(s(mark(X)))
U411(active(X1), X2, X3) → U411(X1, X2, X3)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
ACTIVE(U21(tt)) → MARK(tt)
PLUS(X1, active(X2)) → PLUS(X1, X2)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U111(active(X1), X2) → U111(X1, X2)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
S(mark(X)) → S(X)
MARK(s(X)) → S(mark(X))
MARK(U12(X)) → U121(mark(X))
U421(X1, X2, active(X3)) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)
ACTIVE(isNat(plus(V1, V2))) → ISNAT(V1)
U211(active(X)) → U211(X)
MARK(U21(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(plus(V1, V2))) → U111(isNat(V1), V2)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(U11(tt, V2)) → ISNAT(V2)
ACTIVE(isNat(s(V1))) → ISNAT(V1)
MARK(0) → ACTIVE(0)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(X1, mark(X2), X3) → U411(X1, X2, X3)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(plus(X1, X2)) → PLUS(mark(X1), mark(X2))
ACTIVE(U12(tt)) → MARK(tt)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 10 SCCs with 27 less nodes.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PLUS(active(X1), X2) → PLUS(X1, X2)
PLUS(mark(X1), X2) → PLUS(X1, X2)
PLUS(X1, mark(X2)) → PLUS(X1, X2)
PLUS(X1, active(X2)) → PLUS(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)
S(active(X)) → S(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(active(X)) → S(X)
S(mark(X)) → S(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U421(X1, X2, active(X3)) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(X1, mark(X2), X3) → U421(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U421(X1, X2, active(X3)) → U421(X1, X2, X3)
U421(X1, active(X2), X3) → U421(X1, X2, X3)
U421(mark(X1), X2, X3) → U421(X1, X2, X3)
U421(active(X1), X2, X3) → U421(X1, X2, X3)
U421(X1, X2, mark(X3)) → U421(X1, X2, X3)
U421(X1, mark(X2), X3) → U421(X1, X2, X3)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U411(X1, X2, active(X3)) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(active(X1), X2, X3) → U411(X1, X2, X3)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U411(X1, X2, active(X3)) → U411(X1, X2, X3)
U411(X1, active(X2), X3) → U411(X1, X2, X3)
U411(X1, mark(X2), X3) → U411(X1, X2, X3)
U411(X1, X2, mark(X3)) → U411(X1, X2, X3)
U411(active(X1), X2, X3) → U411(X1, X2, X3)
U411(mark(X1), X2, X3) → U411(X1, X2, X3)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U311(X1, active(X2)) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U311(X1, active(X2)) → U311(X1, X2)
U311(active(X1), X2) → U311(X1, X2)
U311(mark(X1), X2) → U311(X1, X2)
U311(X1, mark(X2)) → U311(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U211(mark(X)) → U211(X)
U211(active(X)) → U211(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ISNAT(active(X)) → ISNAT(X)
ISNAT(mark(X)) → ISNAT(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U121(mark(X)) → U121(X)
U121(active(X)) → U121(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U121(mark(X)) → U121(X)
U121(active(X)) → U121(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ UsableRulesProof
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ UsableRulesProof
QDP
                ↳ QDPSizeChangeProof
          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

U111(X1, mark(X2)) → U111(X1, X2)
U111(active(X1), X2) → U111(X1, X2)
U111(X1, active(X2)) → U111(X1, X2)
U111(mark(X1), X2) → U111(X1, X2)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs:



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
QDP
            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U12(X)) → MARK(X)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U41(X1, X2, X3)) → MARK(X1)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(plus(N, 0)) → MARK(U31(isNat(N), N))
The remaining pairs can at least be oriented weakly.

ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U12(X)) → MARK(X)
MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U11(X1, X2)) → MARK(X1)
MARK(s(X)) → MARK(X)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U41(X1, X2, X3)) → MARK(X1)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
Used ordering: Polynomial interpretation [25]:

POL(0) = 1   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = x1   
POL(U11(x1, x2)) = x1   
POL(U12(x1)) = x1   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = x1 + x2   
POL(U41(x1, x2, x3)) = x1 + x2 + x3   
POL(U42(x1, x2, x3)) = x1 + x2 + x3   
POL(active(x1)) = x1   
POL(isNat(x1)) = 0   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = x1 + x2   
POL(s(x1)) = x1   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
mark(tt) → active(tt)
active(U31(tt, N)) → mark(N)
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U12(X)) → active(U12(mark(X)))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
mark(isNat(X)) → active(isNat(X))
active(isNat(0)) → mark(tt)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
QDP
                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → MARK(X2)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U41(X1, X2, X3)) → MARK(X1)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
ACTIVE(U31(tt, N)) → MARK(N)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U31(X1, X2)) → MARK(X1)
ACTIVE(U31(tt, N)) → MARK(N)
The remaining pairs can at least be oriented weakly.

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → MARK(X2)
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U41(X1, X2, X3)) → MARK(X1)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
MARK(U21(X)) → MARK(X)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
Used ordering: Polynomial interpretation [25]:

POL(0) = 1   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = x1   
POL(U11(x1, x2)) = x1   
POL(U12(x1)) = x1   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = 1 + x1 + x2   
POL(U41(x1, x2, x3)) = x1 + x2 + x3   
POL(U42(x1, x2, x3)) = x1 + x2 + x3   
POL(active(x1)) = x1   
POL(isNat(x1)) = 0   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = x1 + x2   
POL(s(x1)) = x1   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
mark(tt) → active(tt)
active(U31(tt, N)) → mark(N)
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U12(X)) → active(U12(mark(X)))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
mark(isNat(X)) → active(isNat(X))
active(isNat(0)) → mark(tt)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
QDP
                    ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U41(X1, X2, X3)) → MARK(X1)
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → MARK(X)
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U42(X1, X2, X3)) → MARK(X1)
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U41(X1, X2, X3)) → MARK(X1)
MARK(s(X)) → MARK(X)
MARK(U42(X1, X2, X3)) → MARK(X1)
The remaining pairs can at least be oriented weakly.

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
Used ordering: Polynomial interpretation [25]:

POL(0) = 1   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = x1   
POL(U11(x1, x2)) = x1   
POL(U12(x1)) = x1   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = x2   
POL(U41(x1, x2, x3)) = 1 + x1 + x2 + x3   
POL(U42(x1, x2, x3)) = 1 + x1 + x2 + x3   
POL(active(x1)) = x1   
POL(isNat(x1)) = 0   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = x1 + x2   
POL(s(x1)) = 1 + x1   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
mark(tt) → active(tt)
active(U31(tt, N)) → mark(N)
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U12(X)) → active(U12(mark(X)))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
mark(isNat(X)) → active(isNat(X))
active(isNat(0)) → mark(tt)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
QDP
                        ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U31(X1, X2)) → ACTIVE(U31(mark(X1), X2))
The remaining pairs can at least be oriented weakly.

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
Used ordering: Polynomial interpretation [25]:

POL(0) = 1   
POL(ACTIVE(x1)) = 0   
POL(MARK(x1)) = x1   
POL(U11(x1, x2)) = x1   
POL(U12(x1)) = x1   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = 1 + x2   
POL(U41(x1, x2, x3)) = 0   
POL(U42(x1, x2, x3)) = 0   
POL(active(x1)) = x1   
POL(isNat(x1)) = 0   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = x1 + x2   
POL(s(x1)) = 0   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
QDP
                            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(U11(X1, X2)) → MARK(X1)
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(plus(X1, X2)) → MARK(X1)
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(isNat(plus(V1, V2))) → MARK(U11(isNat(V1), V2))
MARK(U11(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X1)
MARK(plus(X1, X2)) → MARK(X2)
ACTIVE(U11(tt, V2)) → MARK(U12(isNat(V2)))
The remaining pairs can at least be oriented weakly.

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
Used ordering: Combined order from the following AFS and order.
MARK(x1)  =  x1
U41(x1, x2, x3)  =  U41(x2, x3)
ACTIVE(x1)  =  x1
mark(x1)  =  x1
U12(x1)  =  x1
isNat(x1)  =  isNat(x1)
plus(x1, x2)  =  plus(x1, x2)
U11(x1, x2)  =  U11(x1, x2)
U21(x1)  =  x1
tt  =  tt
U42(x1, x2, x3)  =  U42(x2, x3)
s(x1)  =  x1
active(x1)  =  x1
U31(x1, x2)  =  U31(x1, x2)
0  =  0

Recursive path order with status [2].
Quasi-Precedence:
[U412, plus2, U422] > [isNat1, U112] > tt
[U412, plus2, U422] > U312

Status:
plus2: [1,2]
U312: [2,1]
tt: multiset
U422: [2,1]
U412: [2,1]
U112: multiset
isNat1: multiset
0: multiset


The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
mark(0) → active(0)
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
U11(mark(X1), X2) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U12(active(X)) → U12(X)
U12(mark(X)) → U12(X)
mark(tt) → active(tt)
active(U31(tt, N)) → mark(N)
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U12(X)) → active(U12(mark(X)))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(U21(X)) → active(U21(mark(X)))
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(U11(tt, V2)) → mark(U12(isNat(V2)))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
mark(isNat(X)) → active(isNat(X))
s(active(X)) → s(X)
s(mark(X)) → s(X)
active(isNat(0)) → mark(tt)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)
plus(mark(X1), X2) → plus(X1, X2)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
QDP
                                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U12(X)) → MARK(X)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U12(X)) → MARK(X)
MARK(U11(X1, X2)) → ACTIVE(U11(mark(X1), X2))
MARK(U12(X)) → ACTIVE(U12(mark(X)))
MARK(plus(X1, X2)) → ACTIVE(plus(mark(X1), mark(X2)))
The remaining pairs can at least be oriented weakly.

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
MARK(s(X)) → ACTIVE(s(mark(X)))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
Used ordering: Polynomial interpretation [25]:

POL(0) = 0   
POL(ACTIVE(x1)) = 1   
POL(MARK(x1)) = 1 + x1   
POL(U11(x1, x2)) = 1   
POL(U12(x1)) = 1 + x1   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = x1   
POL(U41(x1, x2, x3)) = 0   
POL(U42(x1, x2, x3)) = 0   
POL(active(x1)) = x1   
POL(isNat(x1)) = 0   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = 1   
POL(s(x1)) = 0   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
QDP
                                    ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(plus(N, s(M))) → MARK(U41(isNat(M), M, N))
The remaining pairs can at least be oriented weakly.

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
Used ordering: Polynomial interpretation [25]:

POL(0) = 0   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = 0   
POL(U11(x1, x2)) = 0   
POL(U12(x1)) = 0   
POL(U21(x1)) = 0   
POL(U31(x1, x2)) = 0   
POL(U41(x1, x2, x3)) = 0   
POL(U42(x1, x2, x3)) = 0   
POL(active(x1)) = 0   
POL(isNat(x1)) = 0   
POL(mark(x1)) = 0   
POL(plus(x1, x2)) = 1   
POL(s(x1)) = 0   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
QDP
                                        ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(s(X)) → ACTIVE(s(mark(X)))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U21(X)) → ACTIVE(U21(mark(X)))
MARK(s(X)) → ACTIVE(s(mark(X)))
The remaining pairs can at least be oriented weakly.

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
Used ordering: Polynomial interpretation [25]:

POL(0) = 0   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = 1   
POL(U11(x1, x2)) = 0   
POL(U12(x1)) = 0   
POL(U21(x1)) = 0   
POL(U31(x1, x2)) = 0   
POL(U41(x1, x2, x3)) = 1   
POL(U42(x1, x2, x3)) = 1   
POL(active(x1)) = 0   
POL(isNat(x1)) = 1   
POL(mark(x1)) = 0   
POL(plus(x1, x2)) = 0   
POL(s(x1)) = 0   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
QDP
                                            ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


MARK(U41(X1, X2, X3)) → ACTIVE(U41(mark(X1), X2, X3))
The remaining pairs can at least be oriented weakly.

MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
Used ordering: Polynomial interpretation [25]:

POL(0) = 0   
POL(ACTIVE(x1)) = 0   
POL(MARK(x1)) = x1   
POL(U11(x1, x2)) = x1 + x2   
POL(U12(x1)) = x1   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = 0   
POL(U41(x1, x2, x3)) = 1   
POL(U42(x1, x2, x3)) = 0   
POL(active(x1)) = x1   
POL(isNat(x1)) = 0   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = 0   
POL(s(x1)) = 0   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
QDP
                                                ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U42(tt, M, N)) → MARK(s(plus(N, M)))
The remaining pairs can at least be oriented weakly.

MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
Used ordering: Polynomial interpretation [25]:

POL(0) = 0   
POL(ACTIVE(x1)) = 1   
POL(MARK(x1)) = x1   
POL(U11(x1, x2)) = 0   
POL(U12(x1)) = 0   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = 0   
POL(U41(x1, x2, x3)) = 0   
POL(U42(x1, x2, x3)) = 1   
POL(active(x1)) = x1   
POL(isNat(x1)) = 1   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = x1   
POL(s(x1)) = 0   
POL(tt) = 0   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
s(active(X)) → s(X)
s(mark(X)) → s(X)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ QDPOrderProof
QDP
                                                    ↳ QDPOrderProof

Q DP problem:
The TRS P consists of the following rules:

MARK(isNat(X)) → ACTIVE(isNat(X))
ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(U21(X)) → MARK(X)
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [15].


The following pairs can be oriented strictly and are deleted.


ACTIVE(U41(tt, M, N)) → MARK(U42(isNat(N), M, N))
ACTIVE(isNat(s(V1))) → MARK(U21(isNat(V1)))
The remaining pairs can at least be oriented weakly.

MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(U21(X)) → MARK(X)
Used ordering: Polynomial interpretation [25]:

POL(0) = 0   
POL(ACTIVE(x1)) = x1   
POL(MARK(x1)) = x1   
POL(U11(x1, x2)) = 0   
POL(U12(x1)) = 0   
POL(U21(x1)) = x1   
POL(U31(x1, x2)) = 0   
POL(U41(x1, x2, x3)) = 1 + x1   
POL(U42(x1, x2, x3)) = 0   
POL(active(x1)) = x1   
POL(isNat(x1)) = 1 + x1   
POL(mark(x1)) = x1   
POL(plus(x1, x2)) = 0   
POL(s(x1)) = 1 + x1   
POL(tt) = 1   

The following usable rules [17] were oriented:

isNat(active(X)) → isNat(X)
isNat(mark(X)) → isNat(X)
U21(active(X)) → U21(X)
U21(mark(X)) → U21(X)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)



↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ QDPOrderProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof
QDP
                                                        ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

MARK(isNat(X)) → ACTIVE(isNat(X))
MARK(U42(X1, X2, X3)) → ACTIVE(U42(mark(X1), X2, X3))
MARK(U21(X)) → MARK(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [15,17,22] contains 1 SCC with 2 less nodes.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ QDPOrderProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof
                                                      ↳ QDP
                                                        ↳ DependencyGraphProof
QDP
                                                            ↳ UsableRulesProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U21(X)) → MARK(X)

The TRS R consists of the following rules:

active(U11(tt, V2)) → mark(U12(isNat(V2)))
active(U12(tt)) → mark(tt)
active(U21(tt)) → mark(tt)
active(U31(tt, N)) → mark(N)
active(U41(tt, M, N)) → mark(U42(isNat(N), M, N))
active(U42(tt, M, N)) → mark(s(plus(N, M)))
active(isNat(0)) → mark(tt)
active(isNat(plus(V1, V2))) → mark(U11(isNat(V1), V2))
active(isNat(s(V1))) → mark(U21(isNat(V1)))
active(plus(N, 0)) → mark(U31(isNat(N), N))
active(plus(N, s(M))) → mark(U41(isNat(M), M, N))
mark(U11(X1, X2)) → active(U11(mark(X1), X2))
mark(tt) → active(tt)
mark(U12(X)) → active(U12(mark(X)))
mark(isNat(X)) → active(isNat(X))
mark(U21(X)) → active(U21(mark(X)))
mark(U31(X1, X2)) → active(U31(mark(X1), X2))
mark(U41(X1, X2, X3)) → active(U41(mark(X1), X2, X3))
mark(U42(X1, X2, X3)) → active(U42(mark(X1), X2, X3))
mark(s(X)) → active(s(mark(X)))
mark(plus(X1, X2)) → active(plus(mark(X1), mark(X2)))
mark(0) → active(0)
U11(mark(X1), X2) → U11(X1, X2)
U11(X1, mark(X2)) → U11(X1, X2)
U11(active(X1), X2) → U11(X1, X2)
U11(X1, active(X2)) → U11(X1, X2)
U12(mark(X)) → U12(X)
U12(active(X)) → U12(X)
isNat(mark(X)) → isNat(X)
isNat(active(X)) → isNat(X)
U21(mark(X)) → U21(X)
U21(active(X)) → U21(X)
U31(mark(X1), X2) → U31(X1, X2)
U31(X1, mark(X2)) → U31(X1, X2)
U31(active(X1), X2) → U31(X1, X2)
U31(X1, active(X2)) → U31(X1, X2)
U41(mark(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, mark(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, mark(X3)) → U41(X1, X2, X3)
U41(active(X1), X2, X3) → U41(X1, X2, X3)
U41(X1, active(X2), X3) → U41(X1, X2, X3)
U41(X1, X2, active(X3)) → U41(X1, X2, X3)
U42(mark(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, mark(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, mark(X3)) → U42(X1, X2, X3)
U42(active(X1), X2, X3) → U42(X1, X2, X3)
U42(X1, active(X2), X3) → U42(X1, X2, X3)
U42(X1, X2, active(X3)) → U42(X1, X2, X3)
s(mark(X)) → s(X)
s(active(X)) → s(X)
plus(mark(X1), X2) → plus(X1, X2)
plus(X1, mark(X2)) → plus(X1, X2)
plus(active(X1), X2) → plus(X1, X2)
plus(X1, active(X2)) → plus(X1, X2)

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We can use the usable rules and reduction pair processor [15] with the Ce-compatible extension of the polynomial order that maps every function symbol to the sum of its argument. Then, we can delete all non-usable rules [17] from R.

↳ QTRS
  ↳ DependencyPairsProof
    ↳ QDP
      ↳ DependencyGraphProof
        ↳ AND
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
          ↳ QDP
            ↳ QDPOrderProof
              ↳ QDP
                ↳ QDPOrderProof
                  ↳ QDP
                    ↳ QDPOrderProof
                      ↳ QDP
                        ↳ QDPOrderProof
                          ↳ QDP
                            ↳ QDPOrderProof
                              ↳ QDP
                                ↳ QDPOrderProof
                                  ↳ QDP
                                    ↳ QDPOrderProof
                                      ↳ QDP
                                        ↳ QDPOrderProof
                                          ↳ QDP
                                            ↳ QDPOrderProof
                                              ↳ QDP
                                                ↳ QDPOrderProof
                                                  ↳ QDP
                                                    ↳ QDPOrderProof
                                                      ↳ QDP
                                                        ↳ DependencyGraphProof
                                                          ↳ QDP
                                                            ↳ UsableRulesProof
QDP
                                                                ↳ QDPSizeChangeProof

Q DP problem:
The TRS P consists of the following rules:

MARK(U21(X)) → MARK(X)

R is empty.
Q is empty.
We have to consider all minimal (P,Q,R)-chains.
By using the subterm criterion [20] together with the size-change analysis [32] we have proven that there are no infinite chains for this DP problem.

From the DPs we obtained the following set of size-change graphs: